|
| |
Features:
- This new door sysem takes the hassle out of your crew building doors at the job site.
- This new system is stronger than most systems available and sub- stantially lighter, to allow easy sliding for opening and closing of doors.
- The Country Squire is available with tempered window lites with an integral grid pattern and with a crossbuck pattern at the bottom. It is also available with- out windows with a double crossbuck pattern
Sizes:
Available in 36 standard sizes and styles, including both double doors as shown and single door configurations, with or without tempered glass windows with grids. Standard sizes for single doors range from 4' wide x 8' high to 6' x 12'. Standard double door sizes range from 8' x 8' to 12' x 12'. Custom sizes also available.
Door Components:
Framing is made w/ CannonBall: HNP's own Kwik-Frame verticals and bottom rails, the horizontal girts are made w/ heavy duty 20 gauge galvanized steel. The frame system is layered with 3/8" plastic then seal coated w/ an adhesive to hold the 29 gauge painted steel skin covering. Over this is applied the window (If window is ordered) then the whole perimeter is applied w/ a heavy gauge aluminum extrusion to accent the door and to form the crossbuck feature at the bottom of door panel.
All colors standardard for inset panels. *Additional colors available for Frame and Trim. Colors shown indicate approximate representation of the actual color.
|
|
|
|
|
| Turbo Shears |
|
One-Hand Operation!
Heavy-duty jaws and gearing are suitable for cutting 18-Gauge galvanized steel and most other common sheet metals. 20-gauge capacity in spiral duct and layered metal seams.
|
| |
| Snips For Metal Panels |
Max 2000 with Ergonomic Grip (Cuts left, right or straight)
Available in red, green or yellow
Max 2000 with Offset Aviation (Cuts left or right angles)
Available in red or green
|
| |
| Hand Seamers |
|
Hand Seamers with Forged Steel Jaws. (3 or 6 inch jaws, 3 inch jaws with offset handles)
|
| "Magnetic Tip" Tape Measure |
Ideal for working with metal! Available sizes: 1"x16', 1"x25', 1"x30'.
|
|
|
